So I tore down my Penn Conflict II 3000 for a good cleaning. Wanted to replace some of the bearings, so pulled up the schematic and ordered the parts for my reel. However I when trying to reassemble using the schematic, it seems incorrect. Working right to left, bearing 20B is too small and the clutch assembly slides completely over the bearing. Now there is a slot in the housing to prevent it from sliding all the way down, but as you see in pic 3, that bearing is no where near large enough to fill the housing it is meant to reside in. 4th and 5th pics are from disassembly, you can see that bearing appears to be larger.
Posted by kawon_37